Custom Antique Brass Bar Foot Rail Kit

Bar Foot Rail Kits · Lyfe Hardware

Custom Antique Brass Bar Foot Rail Kit

By Lyfe Hardware

One bar foot rail, 9 finishes, cut to your bar.

Finish: Compare all 9 finishes
    $299.99$388.70
    Size
    Diameter

    Between sizes? Order the next length up and trim it at home before the end caps go on.

    Made to order. Lead time is 1 to 2 weeks.

    Compare Bar Foot Rail Finishes

    Every Bar Foot Rail Finish Below

    Same kit, same brackets, nine finishes. Filter by tone, then add the length you need straight from the card.

    Filter
    Finish tone
    • Custom Antique Brass Bar Foot Rail Kit5.0 (25)Rated 5.0 out of 5 from 25 reviewsFrom $299.99$388.70
    • Custom Matte Black Bar Foot Rail Kit4.7 (15)Rated 4.67 out of 5 from 15 reviewsFrom $199.99$259.99
    • Custom Polished Brass Bar Foot Rail Kit5.0 (21)Rated 5.0 out of 5 from 21 reviewsFrom $199.99$259.99
    • Custom Satin Brass Bar Foot Rail Kit5.0 (4)Rated 5.0 out of 5 from 4 reviewsFrom $199.99$259.99
    • Custom Oil Rubbed Bronze Bar Foot Rail Kit5.0 (8)Rated 5.0 out of 5 from 8 reviewsFrom $199.99$259.99
    • Custom Brushed Stainless Steel Bar Foot Rail Kit5.0 (6)Rated 5.0 out of 5 from 6 reviewsFrom $299.99$389.98
    • Custom Antique Bronze Bar Foot Rail KitFrom $299.00$388.70
    • Custom Antique Copper Bar Foot Rail Kit5.0 (8)Rated 5.0 out of 5 from 8 reviewsFrom $299.00$388.70
    • Custom Polished Stainless Steel Bar Foot Rail Kit5.0 (6)Rated 5.0 out of 5 from 6 reviewsFrom $299.99$389.98
    • No minimum orderOne kit or fifty. Homes and small bars order the same way.
    • Everything in the boxTube, combination brackets, end caps, splicer and screws.
    • Installs in under an hourNo back-bar access needed with combination brackets.
    • A team behind every orderTalk to a railing specialist: +1 (833) 300-0997
    Bar foot rail kit parts laid out: two brass tubes, three combination brackets, end caps, splicer and screws

    Unlimited configuration

    A Bar Foot Rail That Snaps Together Like Building Blocks

    Every LH bar foot rail is a set of parts, not a fixed product. Tube, brackets, end caps and splicers fit together in any combination, so the same kit runs along a home bar, wraps a kitchen island or lines a pub counter. Start with a kit, then add elbows or extra brackets as your bar grows.

    • 1Tube1.5" or 2" outside diameter, 2 to 14 ft. Longer runs join with the splicer.
    • 2BracketsMultiple mounting options: fix to the bar face and floor, the bar face only, or the floor only, holding the rail about 6 inches up.
    • 3End capsClose each end for a finished look.
    • 4Splicer and screwsJoin lengths cleanly; every screw is in the box.

    Need a different look? Choose from five bracket styles.

    See every bracket style
    • CombinationCombination
    • Bar mountBar mount
    • Floor mountFloor mount
    • Center postCenter post
    • ContemporaryContemporary

    How to Size a Foot Rail on Your Bar

    Three measurements, two minutes. Every kit comes in 2 to 14 ft and two diameters.

    1. 1Measure the runMeasure the bar face where the rail will sit, end to end.
    2. 2Pick the lengthChoose the next size up. Measure, trim the excess and fit the end caps for a custom fit.
    3. 3Pick the diameter2" reads bold on a pub foot rail or a long commercial bar. 1.5" suits home bars and lower stools where a 2" bar is too large.

    Kits are for straight runs. A bar with turns needs bent tube, which our team makes to order.

    Polished brass bar foot rail bent to follow the corners of a walnut bar

    Custom builds

    Turns, Curves or a Long Commercial Bar? Our Team Builds It

    Not every bar is a straight line, and not everyone wants to install it themselves. Send us a sketch or your measurements. Our team bends, cuts and finishes the rail in our own facility, so it arrives made for your bar.

    1. 1Share your drawing or measurements
    2. 2Approve the drawing we send back
    3. 3See photos of your order before it ships

    Custom lead time is typically 2 to 4 weeks. No minimum order on custom builds either.

    Get a Free Quote

    What Buyers Say About Their Bar Foot Rail

    Real reviews from our bar foot rail kit pages. Each card names the finish it was left on.

    • ★★★★★
      “We are so glad we purchased the 2” foot rail in antique brass for our bar! It’s excellent quality & completed the look we were going for! Customer service was excellent too!”

      Anonymous · Antique Brass

    • ★★★★★
      “The 1.5" rail kit was exactly what I was looking for. Excellent Quality. Simple to install with included mount hardware screws and wall anchors. Very sturdy.”

      Timothy · Oil Rubbed Bronze

    • ★★★★★
      “Nice weight, nice finish, easy to install. Our customers are very happy with the matte black foot rail.”

      Ron · Matte Black

    • ★★★★★
      “Went with the 2" polished brass and we love how it looks. Solid construction.”

      Danika Herrick · Polished Brass

    • ★★★★★
      “Very nice looking. My handyman had no trouble at all with the installation”

      Cindy Blanck · Antique Brass

    • ★★★★★
      “Custom order was a breeze with their assistance, and the result was flawless. Delighted!”

      Emily H. · Polished Stainless Steel

    Bar Foot Rail FAQ

    What exactly is a bar foot rail?

    It is the metal rail along the bottom of a bar, about 6 inches off the floor, where people rest their feet. You might also hear it called a bar foot rest or a foot rest bar. A bar with foot rail feels finished, and stools stay comfortable for longer.

    How high off the floor should the rail sit?

    About 6 inches up and 6 inches out from the bar face. That suits a foot rail at bar height or counter height, and our combination brackets hold the rail right there. For lower stools, center post brackets sit lower, about 3.5 inches.

    Is the brass actually solid brass?

    Yes. Our brass bar foot rail is solid grade brass, not plated; the stainless finishes are 304-grade steel. Like any brass foot rail for a bar, it develops a natural patina over time, so small colour differences between parts even out.

    Will it hold up in a busy commercial bar?

    Yes. Our pub foot rail kits are industrial grade and suit restaurants and bars as well as homes. For long or busy counters, the 2" diameter gives the classic pub look.

    Will a kit fit a bar with corners?

    Kits are made for straight runs. For a foot rail on bar fronts with corners or curves, send us your measurements and our team will bend the tube to fit.

    Can I order just one kit?

    Yes, there is no minimum order. Order a single kit, or one spare bracket. Homeowners and small businesses buy the same way trade customers do.

    What comes in the box?

    Every bar foot rail kit comes with tube cut to the length you choose, combination brackets, end caps, a tube splicer and screws. The number of parts depends on the length.

    Can I install it myself?

    Yes. A brass foot bar rail kit goes in in under an hour with basic tools: measure, trim if needed, fix the brackets, slide in the tube and fit the end caps. The instruction manual and video are on each product page.

    How long until it arrives?

    Kits are made to order. Lead time is 1 to 2 weeks. Long rails may arrive in shorter lengths that join with the included splicer.

    Pick Your Finish. We’ll Handle the Rest.

    Nine finishes, ten lengths, two diameters, no minimum order.

    Choose My Finish

    Made to order · Lead time is 1 to 2 weeks · Questions? support@lyfehardware.com